色综合久久久久综合一本到桃花网丨性一交一乱一伦一色一情丨午夜理论无码片在线观看免费丨亚洲国产精品成人精品片丨日韩精品一区二区三区四虎

廣東海達儀器

檢測儀器供應商

服務熱線:

產品中心

PRODUCTS CENTER

當前位置:首頁產品中心工業烤箱HD-1036皮革耐撓性試驗機,東莞皮革耐撓性試驗機,皮革耐撓性試驗機*

皮革耐撓性試驗機,東莞皮革耐撓性試驗機,皮革耐撓性試驗機*
產品簡介:

皮革耐撓性試驗機產品簡介:
本試驗機用用于沙發面料的撓性試驗.
電源: 220伏300瓦
設計標準: EN ISO 5402

產品型號:HD-1036

更新時間:2023-08-09

廠商性質:生產廠家

訪 問 量 :3885

服務熱線

立即咨詢
產品介紹

 

一、皮革耐撓性試驗機說明:

            使用耐橈專用夾具測試皮革表面在不斷受外力作用下皮料發生皺摺和破損的情形,本試驗機用用于沙發面料的撓性試驗.
 

二、皮革耐撓性試驗機目的 :  

             用于沙發上的皮革如果有良好的抗彎折的特性, 生產出來的沙發便不容易起皺接, 沙發會更美觀耐用.

         Purpose: If the leather use for the sofa have a good flex resistance properties, the product will have little chance to become winkle, and the product will be more durable and more comfortable.

 

               本皮革耐撓性試驗機適用于3毫米厚度以下的皮革.

                Applicable to all types of leather below 3.0 mm in thickness.

三、皮革耐撓性試驗機技術參數:

                試片: 70*45mm

                彎折角度: 22.5

               彎折速度: 100±5cpm

                計數器: 0~999,999(六位數)

                電源: 220伏300瓦
設計標準: EN ISO 5402 

 1)      Open the upper and lower clamps so that the gap is at least twice the thickness of the test piece.

打開上、下夾,其打開的夾縫應不少於待測試皮夾的2倍。

       2)      Turn the upper clamp so that its lower edge is parallel to the upper edge of the fixed lower clamp.

調整上夾使其底邊跟下固定夾的上邊平行。

      3)      Fold the test piece in two with the surface to be tested inwards so that the two longer sides are brought together. Clamp the folded test piece as shown in below figure (a) with the folded edge against the ledge and the end against the stop formed by the clamping screw.

將皮革沿長邊對摺(測試面朝內), 將已對摺的皮革按下圖(a) 的樣子,摺邊擱在上夾突出的邊上,末端則貼近由鎖緊螺絲造成的限位上。

把未有夾緊的那一頭往外然后向下拉, 把兩個里面併攏, 然后將開口端按圖(c)夾緊在下夾,注意不要過份夾緊以致夾壞皮革,并且要跟對摺面垂直。

       5)      Run the machine for the required number of flex cycles selected from the following list:

Dry flex: 500;1000;5,000;10,000;20,000;25,000;50,000;100,000;150,000;

        200,000;250,000 CYCLES

 按所需測試週期開始測試。

       6)      cutting of sample: A rectangle shaped sample 70 ±1 mm x 45 ±1 mm.

       7)      樣辦尺寸: 70 ±1 mm x 45 ±1 mm.

 

      4)      Draw the free corners of the test piece outward and downward around the clamp as shown in figure (b). Bring the inner surfaces together and clamp the free end in the lower clamp as shown in figure (c), with the part of the folded test piece in the clamps vertical and using no more force than is necessary to make the leather just taut.

 

如需了解更多詳細信息,請,:

在線留言

ONLINE MESSAGE

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯數字),如:三加四=7
  • 服務熱線
  • 電子郵箱

    2316064094@qq.com

掃碼加微信

Copyright © 2025 廣東海達儀器有限公司版權所有    備案號:粵ICP備08009758號

技術支持:化工儀器網    sitemap.xml

粵公網安備44190002002798號

主站蜘蛛池模板: 武安市| 广汉市| 随州市| 肇东市| 淳化县| 郓城县| 尚志市| 侯马市| 普格县| 邯郸县| 东城区| 宁陵县| 临江市| 阿拉尔市| 肇州县| 通山县| 博客| 鄯善县| 大英县| 洛宁县| 昆明市| 怀远县| 榆社县| 锡林郭勒盟| 淮阳县| 神池县| 房产| 田东县| 工布江达县| 黑山县| 晋城| 奉新县| 昌图县| 肇庆市| 永年县| 南乐县| 鹰潭市| 恩平市| 临沧市| 扶余县| 肥东县|